2023 Marin Alpine Trail E2
| Availability: | In stock (2) |
SIZE RANGE: S, M, L, XL
| Size | Rider height range |
|---|---|
| S | 5'3" to 5'6" |
| M | 5'6" to 5'10" |
| L | 5'10" to 6'2" |
| XL | 6'2" to 6'4" |
The Marin Alpine Trail E2 is our top-end Alpine Trail, ready to tame the roughest and toughest of trails. For the best of the bunch, we’ve packed in the big-dog Shimano STEPs EP801 system and a long-lasting 630Wh battery, Fox 38/Float DHX2 Performance Elite suspension and a blend of Shimano XT and SLX 12-speed.
Key upgrades from Alpine Trail E1:
- Shimano STEPS EP801 system
- Fox 38/Float DHX2 Performance Elite suspension
- Shimano XT/SLX 12-speed drivetrain w/10-51t cassette
SPECIFICATIONS
FRAME
Series 4 Alloy Frame, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
FORK
Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
SHOCK
Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring Rate = 350lb, L/XL Spring Rate = 450lb
RIMS
Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible
HUB REAR
Forged Aluminum, 148x12mm, Disc, 32H
HUB FRONT
Forged Aluminum, 148x12mm, Disc, 32H
SPOKES
14g Black Stainless Steel
TIRES
Front: Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Rear: Vee Tire Co. Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible
DERAILLEUR REAR
Shimano XT 12-Speed, SGS
SHIFT LEVER
Shimano SLX 12-Speed, I-Spec EV
CRANKSET
Shimano XT M8150, 160mm Length, 38t Chainring
MOTOR
Shimano Steps EP801 Drive Unit, 250W, 85Nm
CHAIN
KMC E12S, eMTB-Specific Chain
CASSETTE
SunRace 12-speed, 11-51
BRAKES FRONT
4-Piston Hydraulic Disc, 203mm Rotor
BRAKES REAR
4-Piston Hydraulic Disc, 203mm Rotor
HANDLEBAR
Marin Trail Bar, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back
STEM
Marin CNC, 35mm Length, 35mm Bar Bore
GRIPS
Marin Grizzly Lock On
HEADSET
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
SEATPOST
X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
SADDLE
Marin eMTB Saddle
PEDALS
Marin MTB Plastic
BATTERY
BT-8036, Internal 630Wh
DISPLAY
SC-E600 Display
SWITCH
SW-EN600L Left Hand Switch for Assist Mode Change
EXTRAS
Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore, 29" Pro Front, Plus Rear, with CushCore Valve Stems
*Specifications, pricing, and availability are subject to change without notice*
TECHNOLOGY
SERIES 4 ALUMINUM FRAME
Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
MULTITRAC SUSPENSION
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.
MIXED WHEEL SIZES
29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.
DROPPER POST OPTIMIZED
The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.
GEOMETRY
| S | M | L | XL | |
|---|---|---|---|---|
| STACK | 613 | 622 | 631 | 640 |
| REACH | 445 | 465 | 485 | 505 |
| HEADTUBE ANGLE | 63° | 63° | 63° | 63° |
| HEADTUBE LENGTH | 100 | 110 | 120 | 130 |
| SEATTUBE ANGLE | 78° | 78° | 78° | 78° |
| SEATTUBE LENGTH | 390 | 400 | 425 | 430 |
| TOPTUBE EFFECTIVE | 575 | 597 | 619 | 641 |
| BB HEIGHT | 340.5 | 340.5 | 340.5 | 340.5 |
| BB DROP | 28 | 28 | 28 | 28 |
| CHAINSTAY | 435 | 435 | 435 | 435 |
| WHEELBASE | 1215 | 1239 | 1264 | 1288 |
| STANDOVER HEIGHT | 681.6 | 681.4 | 686.8 | 689.8 |
| FORK OFFSET | 44 | 44 | 44 | 44 |
| SEATPOST DIAMETER | 30.9 | 30.9 | 30.9 | 30.9 |
| HANDLEBAR WIDTH | 780 | 780 | 780 | 780 |
| STEM LENGTH | 35 | 35 | 35 | 35 |
| CRANK LENGTH | 160 | 160 | 160 | 160 |
All lengths in millimeters
