2023 Marin Rift Zone Jr. 24"
|Availability:||In stock (1)|
SIZE RANGE: 24, One Size
|Size||Rider height range|
|ONE SIZE||122.5cm to 142.5cm|
|142.5cm to 157cm|
REAL SINGLETRACK RIDING
KEEPING UP WITH THE PARENTS
Because young rippers need that Rifty Love too! Our take on the ultimate do-it-all trail bike, bringing big-bike performance for younger riders.
The Marin Rift Zone Jr is made to party, just like the full-sized Rifty. It has 24" wheels that are a little smaller than our full-sized bikes, making it the perfect gateway ride for tweeny riders. And just like the 'grown up' Rift Zone, it has 130mm rear travel, a lightweight aluminum frame and our super-plush MultiTrac suspension platform for endless good times on the trails.
And best of all, the Rift Zone Jr can grow with your child. Got another little shredder on the way? The Rift Zone Jr shares the same frame, fork and shock as the Rift Zone 26". Simply swap the wheels to 26" and longer cranks as your child outgrows the Jr.
All New Series 3 6061 Aluminum Frame, 24" Wheel w/ Clearance for 26", 130mm Travel, MultiTrac Suspension Platform, 135mm Open Dropout (Upgradeable to 142x12mm Thru-Axle), 73mm Threaded BB
X-Fusion Velvet RLC 26", 130mm Travel, Compression and Rebound Adjustment, 100x15mm Thru-Axle
X-Fusion O2 Pro R, 190x51mm, Custom Tune, M8x22.2mm Hardware
Marin, Double Wall Alloy, 27mm Inner, Pinned Joint, Disc Specific
Forged Alloy, 135mm, Quad Sealed Bearings, Centerlock Disc, 32H
Forged Alloy, 100x15mm, Centerlock Disc, 32H
14g Stainless Steel
Vee Tire Co., Flow Snap 24x2.4", Tackee Compound, Wire Bead
Shimano Deore, 11-Speed, SGS
Shimano Deore, 11-Speed, SL-5100R
Marin Forged Alloy 1x11, Hollow Spindle, Steel Narrow Wide 32T Chainring, Direct Mount Type
External Sealed Cartridge Bearings
KMC X-11 Silver and Black
SunRace, 11-Speed, 11-51T, ED Black
Shimano MT-201 Hydraulic Disc, 180mm Rotor
Shimano MT-201 Hydraulic Disc, 160mm Rotor
Shimano BL-MT201 Hydraulic
Marin Mini-Riser, 6061 Double Butted Aluminum, 15mm Rise, 720mm Width, 4º Up, 9º Back
Marin 3D Forged Alloy, 35mm
Marin Dual Density
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
Marin Alloy, 30.9mm
Marin Speed Concept
Specifications, pricing, and availability are subject to change without notice.
All lengths in millimeters
We put as much attention when designing the Rift Zone 26/Jr as we do the adult bikes, so young riders get to experience modern long/low/slack geometry, enhancing comfort and control when the trail gets steep and/or rough.
Easily adjustable air suspension is tunable for a growing kid.
INTERNAL CABLE & HOSE ROUTING
The Rift Zone 26 and Rift Zone Jr are compatible with internally routed dropper posts, with internal rear derailleur routing for a clean look and snag free ride. Unused ports come pre-plugged, to keep the frame insides clean.
Hydraulic disc brakes provide smooth, controlled stopping in all conditions with minimal maintenance.
24” WHEELS – UPGRADEABLE TO 26”
The 24" wheel Rift Zone Jr can fit 26” wheels down the road, extending its life and versatility.
REAR SHOCK SET UP
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
X-FUSION O2 PRO R